TAKE CARE OF YOUR PRESS PARTS

Automated Parts Washing Systems for Label, Flexo, and Gravure Printing

Improve safety, consistency, and productivity with fully automated washing systems engineered for press parts of all sizes. Flexo Wash machines deliver fast, repeatable cleaning for all ink types while reducing downtime and chemical use.

Proven Performance for Flexo and Gravure Press Parts Cleaning

Automated parts washing eliminates manual cleaning steps that slow production and increase risk. Flexo Wash systems clean press parts in as little as 20 minutes—reducing operator labor, improving safety, and extending equipment life.

Short Cycle Safe Operation All Ink Types
Short cycle times (typical 20–25 min.) Safe and easy operation with minimal maintenance Compatible with water-based, solvent, and UV inks
Efficient two-stage wash and rinse process Closed-loop fluid recirculation to reduce chemical consumption Custom racks for trays, doctor blades, ink pans, and anilox components

Automatic press parts washers for narrow and wide web printing operations.

Label & Narrow Web Presses

Compact systems for label and narrow web operations handle daily cleaning of ink trays, doctor blades, and removable press parts. Models feature:

  • dual-stage wash/rinse tanks,
  • solvent or water-based cleaning solutions,
  • custom racks designed for specific press components.
Result: consistent cleaning quality and safer handling in small-format production environments.

Flexo & Gravure / Wide Web Presses

Engineered for large-format press parts, these systems combine high-volume flow with mechanical movement for thorough coverage. Available with:

  • loading trolleys for easy handling
  • customized washing area
Result: fast, repeatable cleaning performance for wide web and gravure operations.

Two-Stage Wash and Rinse for Flexo and Gravure Press Parts

Each system uses a proven two-step process:

  1. Wash Cycle: A high-flow nozzle arm sprays cleaning liquid across the entire surface area to dissolve ink and coating residues.

  2. Rinse Cycle: A secondary rinse removes residual contaminants before air drying or draining.

All liquids are filtered and recirculated, minimizing waste and ensuring consistent results from cycle to cycle.

Safe, Eco-Conscious Operation

Flexo Wash parts washers use sealed systems that protect operators from solvent exposure and reduce emissions. Optional eco-friendly solutions are available for facilities seeking non-flammable, low-VOC operation.

  • Fully enclosed design

  • Stainless-steel construction for long service life

  • Optional filtration, distillation, or reuse modules

  • UL-listed electrical components and safety interlocks

 

Built to Your Requirements

Every system is configured for your pressroom layout, part dimensions, and ink chemistry. Provide your press make and model, and our team will recommend the correct configuration for cycle time, capacity, and chemical compatibility.

Manual vs. Automated Press Parts Cleaning: Typical Cycle Comparison

Cleaning Method Average Time Operator Labor Result Consistency
Manual Cleaning 75 minutes High Variable
Flexo Wash Automated 30 minutes Low Consistent

Customer feedback: "It had a direct positive impact on productivity from day one."

Flexo and Gravure Parts Washer FAQ

What is a flexographic press parts washer?

A flexographic press parts washer is an automated cleaning system that removes ink, adhesive and coating residue from removable flexo and gravure press parts. These include doctor blades and chambers, ink trays and pans, ink pumps, hoses, pots, lids and sumps. Flexo Wash parts washers are built specifically for printing presses, not for general industrial parts cleaning.

What's the best way to clean flexo press parts?

Many printers move from hand cleaning to an automated printing press parts washer for repeatable results. A Flexo Wash system uses a proven two-step process. In the wash cycle, a high-flow nozzle arm sprays cleaning liquid across the parts to dissolve ink and coating residue. In the rinse cycle, a secondary rinse removes remaining contaminants before air drying or draining. All liquids are filtered and recirculated, which reduces waste and keeps results consistent from cycle to cycle.

How long does it take to clean ink trays, chambers and other press parts in a parts washer?

In a typical cycle comparison, manual cleaning of press parts takes about 75 minutes, while a Flexo Wash automated cycle takes about 30 minutes with much less operator labor. The exact time depends on ink type, contamination level, part size and cleaning chemistry.

What types of ink can a printing press parts washer clean?

Flexo Wash parts washers clean water-based inks, UV inks and solvent-based inks, as well as coatings, laminates and adhesives.

Which press parts can a flexo and gravure parts washer clean?

Commonly cleaned components include doctor blades, clamps and chambers; ink pans and trays; ink pumps, hoses and fittings; pots, lids and sumps; and other small press parts. Custom racks can be designed for specific press components, and systems for large-format parts use loading trolleys and a customized wash area.

What's the difference between a narrow web and a wide web parts washer?

Compact systems for label and narrow web presses handle the daily cleaning of ink trays, doctor blades and removable press parts. They feature dual-stage wash and rinse tanks, solvent or water-based cleaning solutions, and custom racks for specific press components. Systems for flexo, gravure and wide web presses are engineered for large-format press parts. They combine high-volume flow with mechanical movement for thorough coverage and are available with loading trolleys and a customized wash area.

What cleaning chemicals does a press parts washer use?

Flexo Wash systems can use water-based detergents, low-VOC or environmentally friendly cleaners, customer-supplied solvent blends, and highly alkaline cleaners for multiple ink systems. Optional eco-friendly solutions are available for facilities that want non-flammable, low-VOC operation.

Is a Flexo Wash parts washer environmentally friendly?

Yes. Flexo Wash parts washers are designed to reduce solvent usage, minimize wastewater, filter and reuse cleaning solution, and lower VOC emissions. Sealed systems also protect operators from solvent exposure.

How often should flexo press parts be washed?

It depends on press usage and ink type. Best practice is daily cleaning of ink trays and pumps, and immediate cleaning after color changes, to protect print quality and extend component life.

Does an automated parts washer reduce press downtime?

Yes. Automated cleaning reduces manual labor, speeds up changeovers and delivers consistent results, so presses return to production faster. In a typical comparison, a manual clean takes about 75 minutes and an automated cycle takes about 30.

Can a printing press parts washer be customized for my pressroom?

Yes. Flexo Wash parts washers can be customized for part size and capacity, ink type, automation level, and filtration or heating options. Each system is configured for your pressroom layout, part dimensions and ink chemistry.

What maintenance does a press parts washer need?

Routine maintenance includes monitoring cleaning solutions, cleaning or replacing filters, and inspecting spray systems, pumps and seals to keep the washer performing reliably over the long term.

What are the benefits of automated press parts washing for flexo and gravure printers?

Key benefits include improved print quality, reduced ink contamination, lower labor costs, faster changeovers, longer component life, and a safer, cleaner pressroom.

What information does Flexo Wash need to recommend the right parts washer?

To recommend the best solution, Flexo Wash needs to know which parts will be cleaned, their dimensions, expected quantities per day or week, and your press make and model and ink system.

Customized Wash Area

 

Request a Custom Configuration

Your account manager will help you identify the correct model based on your press type, ink system, and cleaning requirements.

Let us guide you!

Please fill out the form and let us know how we can help you continue your journey towards higher print quality!